Installing 2 Split System Air Conditioners
Case Study: Dual Fujitsu Comfort 9.5 kW System Installation, Nikenbah, Queensland
Client Overview
The homeowners in Nikenbah, Queensland, contacted Atkinsons Air Hervey Bay seeking a high-performance cooling solution for both their main living area and a large attached garage workspace. Queensland’s warm, humid climate makes effective air conditioning essential year-round, not only for comfort but also for protecting stored belongings and maintaining a usable workspace.
The family’s priorities were clear:
- Powerful and consistent cooling in the living room, where they spend most of their time.
- A comfortable, climate-controlled garage suitable for hobbies, projects, and day-to-day use.
- Energy efficiency and reliability from both systems.
After an initial consultation, the team recommended two 9.5 kW Fujitsu Comfort range split systems, one for the living room and one for the garage, to deliver strong cooling capacity, quiet operation, and long-term durability.
Needs Assessment and System Selection
During the on-site consultation, Atkinsons Air technicians evaluated:
- Room dimensions and orientation:
The main living area was open-plan with high ceilings and generous glazing facing west, increasing solar gain. The garage was larger than typical single-car garages and insulated, but still required substantial capacity to handle heat load during summer. - Occupancy patterns:
The homeowners spend evenings and weekends in the living room, but also frequently use the garage throughout the day for woodworking and hobbies. - Insulation and heat sources:
Both spaces had reasonable insulation, but the steel garage door and concrete floor contributed to heat retention. - Electrical capacity and positioning:
The existing electrical setup was suitable for two high-capacity split systems with minimal upgrades.
After reviewing these factors, the team selected Fujitsu Comfort 9.5 kW split systems for both locations. This model was chosen because it:
- Delivers substantial cooling capacity appropriate for large spaces without frequent cycling.
- Features advanced inverter technology for efficient operation and reduced running costs.
- Provides reliable performance and quiet operation, even under heavier loads.
- Offers flexibility in installation with multiple indoor and outdoor placement options.
Air Conditioner Installation Planning and Logistics
The installation was scheduled over a single business day to minimise disruption. Atkinsons Air Hervey Bay coordinated all aspects of the job:
- Pre-installation brief:
Technicians reviewed the placement of the indoor and outdoor units with the homeowners, confirming preferred locations and aesthetic considerations. - Site protection:
Protective coverings were placed on floors and furniture to ensure a clean work environment. - Compliance checks:
All electrical and structural requirements were checked and planned according to Australian Standards and local regulations.
Split System Installation Execution
Living Room System
- Indoor Unit Placement:
- Mounted high on an internal wall to ensure optimum airflow across the open-plan living space.
- Positioned centrally to balance air distribution without causing drafts directly on seating areas.
- Outdoor Unit Positioning:
- Installed on heavy-duty vibration isolators at the rear of the home.
- Located to maximise airflow and minimise noise impact.
- Refrigerant and Electrical Work:
- Copper refrigerant lines were neatly routed through concealed channels.
- Electrical connection made to a dedicated circuit with RCD safety protection.
- Testing and Commissioning:
- System pressure and refrigerant charge were verified.
- Cooling performance, fan speeds, and thermostat operation were tested.
- Homeowners were shown how to use the remote, set timers, and adjust modes.
Garage Air Conditioning System
- Indoor Unit Mounting:
- Placed high on a side wall to provide broad air coverage across the workspace.
- Positioned to avoid obstruction from tools, shelving, and workbenches.
- Outdoor Unit Installation:
- Fixed to an external wall adjacent to the garage with adequate clearance for ventilation.
- Anti-vibration mounts installed to reduce noise transmission.
- Line Set and Wiring:
- Refrigerant lines and condensate piping were run through a protected conduit.
- The electrical feed utilised plug-in isolators for easy future service.
- System Startup & Owner Training:
- System commissioned to ensure reliable cooling at maximum load.
- Owners were instructed on filter cleaning and recommended maintenance schedules.
Outcomes and Client Satisfaction
Upon completion, both systems delivered immediate and measurable benefits:
- Effective Temperature Control:
The living room cooled quickly and maintained comfort even in peak summer heat, transforming the primary family space into a truly comfortable environment. - Garage Comfort Achieved:
The garage, once unbearably hot, now provides a comfortable, controlled workspace, enabling productivity regardless of outdoor temperatures. - Energy Efficiency and Quiet Operation:
The inverter-driven Fujitsu Comfort models operate efficiently with smooth modulation, minimising energy consumption and avoiding loud start-up noise. - Professionalism and Clean Workmanship:
The homeowners commended Atkinsons Air Hervey Bay for their punctuality, attention to detail, and clear explanations during installation and handover.
Conclusion
This dual install demonstrates a comprehensive approach to residential cooling: precise assessment, tailored system selection, and high-quality installation. By selecting two 9.5 kW Fujitsu Comfort range systems, Atkinsons Air Hervey Bay delivered powerful, efficient cooling solutions perfectly matched to the unique needs of both the main living area and the garage in this Nikenbah home. Homeowners now enjoy enhanced comfort, improved usability of their spaces, and reduced stress from Queensland’s demanding climate, a testament to thoughtful design and expert execution.
For reliable, local air conditioning services, including installation, contact Atkinsons Air Hervey Bay to learn more or request a free quote. Tel: 07 5228 3070
What size split system air conditioner suits my home in Nikenbah?
Project Details
- Location – Nikenbah, QLD
- Client – Residential
- System – 9.5 kW Fujitsu Comfort Range Split System
- Task – Install a 9.5kW air conditioner in the living room
- Task – Install a 9.5kW air conditioner in the garage