Split System Air Conditioner Installation Maryborough

Supply and Install 3 New Split System Air Conditioners

Atkinsons Air Hervey Bay Installs Three Fujitsu Reverse Cycle Split Systems in Maryborough Home

In the historic town of Maryborough, Queensland, where summer temperatures can climb into the high 30s and winter mornings can still bring a chill, having a reliable and energy-efficient air conditioning system is essential. Recently, the team at Atkinsons Air Hervey Bay was called upon to supply and install a tailored heating and cooling solution for a family home in the area. The project involved the installation of three Fujitsu reverse cycle split system air conditioners, two 2.5kW units for the bedrooms and one powerful 9.0kW unit for the open-plan living area.

A Tailored Cooling and Heating Solution

The homeowners had recently renovated their Maryborough property and were looking to upgrade their old air conditioning setup to something more energy efficient, quieter, and capable of providing year-round comfort across key areas of the house. After a detailed onsite consultation, Atkinsons Air recommended a multi-unit Fujitsu solution:

• Two 2.5kW Fujitsu units – ideal for smaller rooms such as bedrooms or home offices
  
• One 9.0kW Fujitsu unit – perfect for large open-plan areas like living rooms, dining spaces, or combined kitchen/lounges
  

This configuration ensured each room would be individually climate controlled, maximising both comfort and energy efficiency while reducing running costs compared to ducted systems in a smaller home.

Supply and Preparation

As a trusted Fujitsu dealer, Atkinsons Air Hervey Bay supplied genuine, high-efficiency Fujitsu ASTG09KMTC (2.5kW) and ASTG34KMTC (9.0kW) units from Fujitsu’s Lifestyle Range. These systems are known for their all-DC inverter technology, quiet operation, and advanced features such as:

• Human Sensor Control
  
• Weekly programmable timers
  
• Apple catechin filters for improved air quality
  
• Blue Fin Heat Exchangers for added coastal durability
  
• Auto-restart and auto changeover modes
  

Before installation, a full site assessment was conducted to determine the best placement for each indoor and outdoor unit. Careful attention was given to airflow, aesthetics, noise considerations, and access for future maintenance.

Air Conditioner Installation Day

On installation day, Atkinsons Air’s licensed refrigeration technicians arrived on site with all equipment and materials required. The process began with the mounting and securing of the indoor units. The two 2.5kW units were installed in each of the home’s two bedrooms. These compact indoor heads were positioned high on the wall to ensure maximum airflow coverage while remaining discreet and quiet—ideal for sleeping environments.

The 9.0kW unit was installed in the home’s main living area, which included an open-plan kitchen, dining, and lounge space. Due to the higher capacity and airflow requirements of this unit, the team ensured it was installed with the appropriate clearances and support brackets to handle the larger indoor and outdoor components.

Connecting the System

Refrigerant piping and electrical cabling were run neatly through the walls to connect the indoor units to their corresponding outdoor units. The outdoor condensers were installed in shaded, well-ventilated locations around the side and rear of the property to protect them from sun exposure and to reduce operating noise.

Each system was carefully vacuumed, pressure-tested for leaks, and then commissioned using R32 refrigerant, a low GWP (global warming potential) gas that offers high efficiency with a reduced environmental impact.

Testing and Commissioning

Once installation was complete, each unit was powered on and tested through its full heating and cooling cycle. The airflow, temperature settings, and energy-saving features were demonstrated to the homeowners, and remote controls were configured with timers and preferred temperature ranges.

The installers also showed the homeowners how to:

• Clean and maintain the filters
  
  
• Use the human sensor and economy modes
  
  
• Set weekly timers for automatic temperature control
  
  
• Enable auto changeover for seamless heating and cooling based on the room’s ambient temperature
  
  

The Results

The Maryborough homeowners were extremely pleased with the outcome. The bedrooms quickly reached their ideal sleeping temperatures in near silence, while the living area remained cool and comfortable, even during a 34°C afternoon.

Thanks to the independent zone control, the family can now cool or heat only the rooms in use, helping to reduce electricity costs and environmental impact. The sleek indoor unit design also complemented their freshly renovated interiors.

Why Choose Atkinsons Air Hervey Bay?

Atkinsons Air has built a strong reputation throughout the Fraser Coast region for reliable air conditioning solutions, expert installation, and friendly customer service. As a certified Fujitsu supplier and installer, they offer:

• Honest advice and custom system designs
  
• Professional installation by licensed technicians
  
• Warranty-backed workmanship
  
• Ongoing maintenance and servicing
  

Whether you’re looking to upgrade a single unit or install multiple air conditioners throughout your home, Atkinsons Air Hervey Bay can help you achieve the perfect climate control solution to suit your lifestyle and budget.

Need air conditioning in Maryborough or the Fraser Coast? Contact Atkinsons Air Hervey Bay today for a free quote and experience professional service that keeps you cool year-round.

For reliable, local air conditioning services including installation, contact Atkinsons Air Hervey Bay to learn more or request a free quote. Tel: 07 5228 3070

What size split system air conditioner suits my home in Hervey Bay?